Maintenance; Battery Replacement; Clearing The Rain Collector; Clearing The Thermo-Hygro Sensor Of Wireless 5-In-1 Sensor - Technoline WS1900 Bedienungsanleitung

Maintenance

Battery replacement

If the low battery indicator "
or CH section, it indicates that the current channel
wireless or outdoor 5-in-1 sensor battery power
is low. You should replace all the batteries in the
current channel sensor at once .
Cleaning the rain collector
1 . Unscrew the rain collector by turning it 30°anti-clockwise.
2 . Gently remove the rain collector.
3 . Clean and remove any debris or insects.
4 . Install the collector when it is clean and fully dried.
Cleaning the thermo-hygro sensor of wireless 5-in-1 sensor
1 . Remove the 2 screws at the bottom of the radiation shield.
2 . Gently pull out the shield.
3 . Carefully remove any dirt or insects on the sensor casing (do not
let the sensors inside get wet).
4 . Clean the shield with water to remove any dirt or insects.
5 . Install all the parts back when they are clean and fully dried.
Hereby, Technotrade declares that this product WS 1900 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC.
The original EU declaration of conformity may be found at:
www.technoline.de/doc/4029665019000

Specifications

Station
General Specification
Dimensions (W x H x D)
Weight
Main power
Backup battery
Operating temperature range
Wi-fi Communication Specification
Wi-fi standard
Wi-fi operating frequency
& transmission power :
Supported router security
type
Supported device for setup
UI
" displayed in OUT
136 x 168 x 24.5mm (5.4 x 6.6 x 1in)
370g (with batteries)
DC 5V, 1A adaptor
CR2032, 3V batteries
-5˚C ~ 50˚C
802.11 b/g/n
2.4GHz
b: 17.0dBm / g: 13.5dBm / n: 12.5dBm
WPA/WPA2, OPEN, WEP (WEP only support Hexadecimal
password)
Built-in Wi-fi with AP mode function smart devices, laptops
or PCs: Android smart phone, Android pad, iPhone, iPad or
Windows laptop
EN 22
N
HX075-0501000-AG-001
N N
"Lock" Position "Unlock" Position