Inhaltsverzeichnis
Werbung
www.allice.de
®
R&S
RT-ZD01
Fig. 2-1: Connecting the BNC output connector and the auxiliary ground connector
when using a measurement instrument without grounded inputs
3. Connect the USB power cord to the power input of the probe and to a free
USB port of the oscilloscope. You can also use a USB hub.
Alternatively, the probe can be powered with batteries, see
native Battery
Fig. 2-2: Connecting the probe to the R&S oscilloscope
User Manual 1422.0732.02 ─ 02
Connecting the Probe to R&S Oscilloscopes
Operation",
on page 21.
Allice Messtechnik GmbH
Putting into Operation
chapter 2.3, "Alter-
17
Werbung
Inhaltsverzeichnis
