Safety Instructions; Areas Of Responsibility; Permitted Use; Prohibited Use - Makita SK106D Bedienungsanleitung

Safety instructions

Sa f e t y i n s t r u c t i o n s
The person responsible for the instrument
must ensure that all users understand these
directions and adhere to them.

Areas of responsibility

Responsibilities of the manufacturer of the ori-
ginal equipment:
Makita Corporation Anjo, 3-11-8, Sumiyoshi-cho,
Aichi 446-8502, Japan
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
Internet: www.makita.com
The company above is responsible for supplying
the product, including the User Manual in a com-
pletely safe condition.
The company above is not responsible for third
party accessories.
Responsibilities of the person in charge of the
instrument:
1. To understand the safety instructions on
the product and the instructions in the
User Manual.
2. To be familiar with local safety regulations
relating to accident prevention.
3. Always prevent access to the product by
unauthorised personnel.
Makita SK106D/SK106GD

Permitted use

1. Projection of horizontal and vertical laser
lines and laser points

Prohibited use

1. Using the product without instruction
2. Using outside the stated limits
3. Deactivation of safety systems and
removal of explanatory and hazard labels
4. Opening of the equipment by using tools
(screwdrivers, etc.)
5. Carrying out modification or conversion
of the product
6. Deliberate dazzling of third parties; also in
the dark
7. Inadequate safeguards at the surveying
site (e.g. when measuring on roads, con-
struction sites, etc.)

Hazards in use

WARNING
Watch out for erroneous measurements if the
instrument is defective or if it has been dropped or
has been misused or modified. Carry out periodic
test measurements. Particularly after the instru-
ment has been subject to abnormal use, and
before, during and after important meas-
urements.
CAUTION
Never attempt to repair the product yourself. In
case of damage, contact a local dealer.
WARNING
Changes or modifications not expressively
approved by Makita/manufacturer for compliance
could void the user´s authority to operate the
equipment.
CAUTION
Laser light is bright and blinding. Do not shine at
aircraft or vehicles at any distances.
WARNING
Makita Line Laser and L-adapter / PRO L-adapter
should not be used in the vicinity of pacemaker
because of integrated magnets which can affect
the function of the pacemaker.
19