Manufacturer's Information; Transport; Delivery And Performance - Gemü 615 Original Einbau- Und Montageanleitung

Readings for Process
Contact Surfaces
Ra ≤ 6,30 μm
Ra ≤ 0,80 μm
Ra ≤ 0,60 μm
Surface fi nishes of customized valve bodies may be limited in special cases.
1
Or any other fi nishing method that meets the Ra value (acc. to ASME BPE).
2
The smallest possible Ra fi nish for 1/4" (DN 8) BS 4825 Part 1 and ASME BPE is 15 μinch.
3
When using these surfaces, the bodies are marked according to the specifi cations of ASME BPE.
4
The surfaces are only available for valve bodies which are made of materials (e.g. GEMÜ material codes 40, 41, F4, 44)
and use connections (e.g. GEMÜ connection codes 59, 80, 88) according to ASME BPE.
Not possible for GEMÜ connection code 59, DN 8 and GEMÜ connection code 0, DN 4.
5
Ra acc. to DIN EN ISO 4288 and ASME B46.1
Order example
Type
Nominal size
Body confi guration (code)
Connection (code)
Valve body material (code)
Diaphragm material (code)
Control function (code)
Actuator size (code)
Surface fi nish (code see page 5)
7

Manufacturer's information

7.1

Transport

Only transport the diaphragm valve
G
by suitable means. Do not drop. Handle
carefully.
Dispose of packing material
G
according to relevant local or national
disposal regulations / environmental
protection laws.
615_us
Internal surface fi nishes for investment cast bodies
5
615
615
Mechanically polished
Hygienic class
DIN 11866
-
H3
-
15 D 60
15
D
60
7.2

Delivery and performance

Check the goods for completeness and
G
damage immediately upon receipt.
The scope of delivery is apparent from
G
the dispatch documents and the design
from the order number.
The valve's delivery condition:
G
Control function:
1 Normally closed (NC)
2 Normally open (NO)
3 Double acting (DA)
The function of the diaphragm valve is
G
checked at the factory.
24 / 40
2
Code
1500
1502
1507
C3 17 1
C3
17
1
1/N 1500
1/N
1500
Condition:
closed
open
undefi ned