Reolink Argus 3 Serie Bedienungsanleitung Seite 6

3 4
Screw the camera to Adjust the camera angle to
the bracket. get the best field of view.
NOTE:
To adjust the camera angle later, please loosen the bracket by turning the upper part anticlockwise.
9 English
5
Secure the camera by turning
the part on the bracket
identified in the chart
clockwise.
Install the Camera with Loop Strap
Place the Camera on a Surface
If you plan to use the camera
indoors and put it on a flat
surface, you may place the
camera into the stand bracket
and adjust the camera angle
by slightly rotating the camera
back and forth.
Thread the loop strap
through the slots and
fasten the strap. It is the
most recommended
installation method if you
plan to mount the camera
to a tree.
English 10