Troubleshooting Guide; Warranty - Altrad Belle LIGHTWEIGHT TROWEL Bedienungshandbuch

Problem
Engine will not start.
Engine still will not start.
• Leaving Swirls in Concrete.
• Rolling Concrete.
• Bouncing.
Lightweight Trowel
The following are not covered under the Altrad Belle warranty:
operation or user maintenance instructions.
The following components are not covered by warranty.
• Drive belt
•
• Engine spark plug
losses or expenses in connection with or by reason of or the inability to use the machine for any purpose.
Warranty Claims
For warranty claims:
or Write to:
Warranty Registration:
http://www.bellegroup.com/index.php?p=warranty_registration
the registration page.

Troubleshooting Guide

Cause
No fuel.
Spark plug fouled.
Engine cold.
Cut-Out Switch in OFF position.
Major Fault
Main Shaft
Spider Plate
Blades

Warranty

25
Remedy
Open fuel tap.
Fill fuel tank.
Switch engine on.
Clean and reset plug gap.
Close choke.
Move Cut-Out Switch to ON position.
Contact Agent or Altrad Belle.
check the main shaft of the gearbox.
Check Spider plate for bent trowel arms. If
one is bent replace it.
Check the adjustment on trowel arms at
are adjusted equally.
Blades should be of the same measurement /
Excessively worn blades should not be used.
GB
GB