Accumulation; Battery Fonction - Giropes Baxtran BAR Serie Bedienungsanleitung

5.6. ACCUMULATION

When the scale is set to manual accumulation the weight displayed will be stored in memory when the
and the weight is stable.
The display will show "ACC 1" and then the total in memory for 2 seconds before returning to normal. If the optional RS232
interface is installed the weight will be output to a printer or PC.
Remove the weight, allowing the scale to return to zero and put a second weight on. Press
2" and then show the new total. Continue until all weights have been added.
To view the totals in memory press the
"ACC xx" and the total weight before returning to zero. The totals will also be printed via the RS232 interface.
To erase the memory press

6. BATTERY FONCTION

The balance come with a rechargeable battery, can be operated from the battery if desired. The battery life is approxi-mately 40 hours.
There is a battery symbol on display used to indicator battery status:
Flick: charging battery
Full: battery full or charge finished.
Half: battery with half power.
Blank: need be charged
When the battery needs to be recharged, the indicator lights. Please, load the battery or use an adapter of alternating
current when he/she sees this lit indicator.
The scales can work with batteries if one wants. The duration of the battery is of approximately 90 hours.
To load the battery plug it to the electric net. It is not necessary to light the scale. The recharge should last 12 hours to fill
the battery to full capacity.
There is a LED that indicates the state of the load of the battery. When the scale is plugged to the electric net, the battery
goes into it will load. If LED is green the battery has complete load. If it is red, the battery needs load, and the yellow indica-
tes that the battery is in recharge process.
With the use, the battery can go losing capacity to make complete loads. If the duration of the load of the battery be-comes
unacceptable, contact its distributor.
Note: the new batteries are partially loaded. Before being able to use their scale, it should install and to load the battery following the
following instructions.
Some batteries have a better yield after several complete cycles of load / it discharges.
The yield of the batteries depends on numerous factors, included the configuration of the backlight and the operative one.
Not never use a loader or a battery that are damaged.
Not make a short circuit in the battery. A short-circuit can take place accidental when an object me-
tallic (currency, clip or pen) cause one direct connection of the poles + and. of the battery (you throw
metallic of the battery), for example when it takes a reserve battery in the pocket.
To make a short-circuit of the poles can damage the battery or the object that it is connected.
Not throw the batteries to the fire.
Throw the batteries following the local (for example, reciclaje) regulation.
Not throw the batteries like domestic garbage.
Avoid to load the battery under conditions of lack of air.
In order to maximize the yield of their battery:
Always use batteries and adapter of CA originals. The guarantee of the scale doesn't cover the damages caused as con-
sequence of the use of other batteries and/or different loaders.
The tension of exit of adapting CA is of 12V. The new batteries or those batteries that have been stored during long periods
of time can require a bigger time of load.
Maintain the battery to ambient temperature or a next temperature when it makes the load.
Not expose the batteries to inferior temperatures to -10°C or superiors at 45°C.
In the course of periods of long time, the batteries go losing load capacity progressively and they require longer times of
recharge.
This is normal. If you load the battery regularly and he/she observes that it diminishes the period of operation or that it
increases the period of load, it is probably moment of acquiring a new battery.
34
key when the scale is at zero. The display will show the total number of items
to view the totals and then press the
USER MANUAL BAR
, the display will show "ACC
key to clear the memory.
EN EN
key is pressed