Front Rack Attributes - Schindelhauer Bikes Gustav Benutzerhandbuch

Front rack attributes

1. The rack has a usable surface area of about 35cm x 25cm.
2. Included in the scope of delivery are two approximately 80cm long
EN elastic tensioning straps. They can be used to fix lighter objects up to
5kg on the rack (fig.22).
3. For this, each of the straps has 18 slits to hook the strap to the four
attachment points on the rack fig.23 - 25).
The rack can be loaded with maximum 15 kg. At higher
!
loads, rack and bicycle can be damaged.
Transporting people on the rack is strictly prohibited!
22
38
Before each ride, the following things need to be checked:
• The load must be evenly distributed and secured against slipping out
of position.
• The straps are securely attached to the four attachment points of the
rack.
• No loose parts are hanging through the grid of the rack.
• The balance point of the load lies in the centre of the surface of the rack.
• The load is not wider than the handlebar and does not project more than
10cm beyond the front of the rack.
• The handlebar does not hit the load while steering.
• The ends of the straps must not hang loosely (fig. 26) but must always
be attached to one of the four attachment points of the rack (fig. 27).
23
24
26
25
27
EN
39