Silvercrest DZ 20 DE Bedienungs- Und Sicherheitshinweise Seite 26

4. Set the respective time using the
5. Press the TIMER
6. Set the switch-off time as described in
7. After entering the program, confirm with
Set current status
If the clock should be on at the current time
(ON), the ON / OFF / AUTO button
be pressed until ON appears on the screen.
Then press the button again so AUTO appears.
If the clock should be off at the current time
(OFF), the ON / OFF / AUTO button
be pressed until OFF appears on the screen.
Then press the button again so AUTO appears.
26 GB
274299_B_Zeitschaltuhren_digital_content_RO_BG.indd 26
All manuals and user guides at all-guides.com
HOUR and MINUTE
12
selection. The switch-on time has been
programmed. The LCD
switch-off time.
steps 3. to 5.
the CLOCK button
onds until the current time is displayed.
buttons.
2
button to confirm the
8
will switch to
1
or wait 10 sec-
9
must
5
must
5
22.04.16 07:19