Setting Options On The Escape Door Control Terminal - effeff 1338-14 Installations- Und Montageanleitung

Fig. 5 :
Switching elements
and connections
Tab. 1
JP-1 and JP-2
(Fig. 5)
Configuration

Setting options on the escape door control terminal

F2
F1
A B
Arrangement diagram
Jumpers Function
JP1 plugged Pre-alarm switched on: An acoustic pre-alarm is triggered
in at before an alarm. The pre-alarm does not affect the alarm
factory contact or the visual display.
open Pre-alarm switched off: An acoustic pre-alarm is suppressed.
After the time set on rotary switch S2 has elapsed, the alarm
is triggered.
JP2 plugged in Permanent release switched on: Permanent release via the
at factory key switch of the escape door control unit is possible.
open Permanent release switched off: Permanent release via the
key pushbutton is not possible.
Jumpers (Tab. 1)
JP1
JP2
ON
S4
OFF
1 2 3 4 5
S3
Rotary switch S3 (Tab. 5)
S2
Rotary switch S2 (Tab. 4)
S1
Rotary switch S1 (Tab. 3)
C D E
DIP switch S4 (Tab. 2)
EN EN
47