Residual Risks And Safe Working - Fuxtec FX-LB133T Original Bedienungsanleitung

Original-Bedienungsanleitung FUXTEC Laubbläser FX-LB133T_de_en_fr_ita_rev08
•
Any use other than that mentioned above is an unintended use.
•
Intended use also includes compliance with the operating, maintenance and repair
conditions specified by the manufacturer and the safety instructions contained in the manual.
•
The applicable relevant accident prevention regulations as well as the other generally
accepted occupational health and safety rules must be observed.
•
Any use beyond this is considered improper use. The manufacturer is not liable for damages
of any kind resulting from this: the risk is borne solely by the user.
•
Own modifications to the device preclude any liability of the manufacturer for damages of any
kind resulting from such modifications.
•
The device may only be set up, used and maintained by persons who are familiar with it and
have been informed about the dangers. Repair work may only be carried out by the
manufacturer or by service centres recommended by the manufacturer.
•
The device must not be used in a potentially explosive environment or exposed to rain.
25.

Residual risks and safe working

Even when used as intended, there may still be residual risks due to the design determined by the
intended use, despite compliance with all relevant safety regulations.
Residual risks can be minimized if the "Intended Use" and the "Safety Instructions" as well as the
operating instructions as a whole are observed.
•
Consideration and caution reduce the risk of personal injury and damage.
•
Injury due to disposal of parts.
•
Risk of carbon monoxide poisoning when used in closed or poorly ventilated rooms.
•
Danger of burns from hot components.
•
Hearing is impaired if work is carried out over long periods without hearing protection.
Furthermore, despite all the information and precautions taken, there may be residual risks that
are not obvious.
Warning: The actual vibration emission value present during use of the device may differ from that
specified in the operating instructions or by the manufacturer. This can be caused by the following
influencing factors, which should be observed before or during use:
•
If the device is used correctly
•
Is the device in good working order
•
If the handles are fitted with optional vibration grips and are firmly attached to the
Device body
Read the following instructions and the safety regulations applicable in your country before using
this product to protect yourself and others from possible injury.
Always keep these safety instructions (operating instructions) with the device. The device may
only be operated by persons with sufficient experience.
27