Fuel Filter; Spark Plug - Fuxtec FX-MHP126 Original Bedienungsanleitung

Original Bedienungsanleitung FUXTEC FX-MHP126_de_en_fr_ita_rev05
4. ANTI-VIBRATION SYSTEM
WARNING!
A defective or damaged anti-vibration system can cause breakage, causing the engine and/or
the cutter blade to loosen or fall off.
Check regularly that the springs are not deformed or damaged.
5. AIR FILTERS
IMPORTANT!
A dirty air filter has a negative effect on engine performance.
Check the foam filter and clean with compressed air if necessary. If the filter element is dirty, it
should be replaced.

6. FUEL FILTER

If the fuel supply is reduced, check the fuel filler cap and fuel filter for blockages.
7. COOLING AIR DISCHARGE
This engine is air-cooled. Dust or wood chips between the cooling air intake and the cylinder fins
will cause the engine to overheat. Periodically check and clean the cylinder fins after removing
the air filter and cylinder cover.
8. SPARKPLUG
Starting errors and misfires are often caused by a dirty spark plug. The spark plug must be
cleaned regularly and replaced after request.
IMPORTANT:
When removing the spark plug, do not remove the washer from the spark plug cap. Without this
washer, overheating of the engine may be caused.
IMPORTANT:
When fitting, first tighten the spark plug with your fingers and then tighten with a socket wrench
by about a quarter turn.
TORQUE
15.3-22.4N.m. (150-220kgf-cm)
Spark plug model
L6
Spark plug caps
0.6-0.7mm
47