Software Settings; Configuration Menu - struers ProntoPress-20 Benutzerhandbuch

Software Settings

Configuration Menu

24
ProntoPress-20
Instruction Manual
Switch on the power at the main switch. The following display
will appear briefly:
ProntoPress-20
Version: 2.0
The mounting press will start in the same state, as when the
voltage was last switched off. The display to appear could be the
Select Method Group Menu. If the heading in the display is
different, press Esc until the Select Method Group Menu appears.
The Select Method Group Menu is the highest level in the menu
structure. From here you can go to configuration, manual
functions, select mounting methods in the database and open the
mounting methods.
SELECT METHOD GROUP
1. STRUERS
3. GROUP NUMBER 3
F1:CONFIG. F3:MAN. FUNC.
D
Press F1 to activate the Configuration
F1
Menu.
D
CONFIGURATION
Cylinder Diameter:
Temperature Unit :
Force or Pressure:
2. GROUP NUMBER 2
4. GROUP NUMBER 4
L:25 mm R: 50 mm
CELSIUS
FORCE Unit: kN