Manufacturer's Warranty; Declaration Of Conformity - STEINEL XLED home 2 Bedienungsanleitung

The XLED home 2 SC has an internal clock for
time-based activation and deactivation. This
automatically synchronises with the clock of the
connected smartphone via the Smart Remote app
each time a Bluetooth connection is established.
To ensure correct function following an interrup-
tion in the LED floodlight's power supply, it must
be re-connected via the Smart Remote app. The
internal clock is re-synchronised with the smart-
phone clock.
7. Operation/maintenance
The LED floodlight is not suitable for burglar alarm
systems as it is not tamperproof in the manner pre-
scribed for such systems. Weather conditions may
affect the way the LED floodlight works. Strong
gusts of wind, snow, rain and hail may cause the
light to come ON when it is not wanted because
the sensor is unable to distinguish between sudden
changes in temperature and sources of heat.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
G B
8. Disposal 1
Y E A R
Electrical and electronic equipment, accessories
MANUFACTURER'S
WARRANTY
and packaging must be recycled in an environmen-
tally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste
Electrical and Electronic Equipment and its imple-
mentation in national law, electrical and electronic
equipment no longer suitable for use must be
collected separately and recycled in an environ-
mentally compatible manner.

9. Declaration of Conformity

STEINEL Vertrieb GmbH hereby declares that the
XLED home 2 SC radio equipment type conforms
to Directive 2014/53/EU. The full wording of the
EU Declaration of Conformity is available for
downloading from the following Internet address:
www.steinel.de

10. Manufacturer's Warranty

This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is 5
years and starts on the date of sale to the consum-
er. We will remedy defects caused by material flaws
or manufacturing faults. The warranty will be met by
repair or replacement of defective parts at our own
discretion. The warranty shall not cover damage to
wear parts, damage or defects caused by improper
treatment or maintenance. Further consequential
damage to other objects shall be excluded. Claims
under the warranty will only be accepted if the unit
is sent fully assembled and well-packed with a brief
description of the fault, a receipt or invoice (date of
purchase and dealer's stamp) to the appropriate
Service Centre.
Service:
Our Customer Service Department will repair faults
not covered by warranty or after the warranty pe-
riod. Please send the product well-packed to your
nearest Service Centre.
3
Y E A R
MANUFACTURER'S
WARRANTY
– 21 –
5
Y E A R
MANUFACTURER'S
WARRANTY
GB