Aircraft Leds And Status Indicator - Reely 2346659 Bedienungsanleitung

Attentions:
• The aircraft cannot avoid obstacles when it is flying back during the RTH process.
• The aircraft cannot return to the Return Point if the GPS signal is weak or unavailable.
• During RTH process, when the aircraft is flying above 30 meters, the aircraft will immediately perform the RTH
function; when flying below 30 meters, the aircraft will rise to 30 meters automatically and then perform the RTH
function.
• If the aircraft does not receive the satellite signal or the signal of the remote controller continues to be lost for more
than 2 seconds, the aircraft will not be able to return, and will slowly descend until it lands.

5.4 Aircraft LEDs And Status Indicator

a. Vision Positioning Status Indicator - LED
Flashing red light
Solid red light
b. Flight Status Indicator - LED
Solid blue light on start-up
Solid green light
Flashing green light
Red and blue light flashing alternately
Red and green light flashing alternately
Flashing blue light
Solid blue light
Solid red light
58
a b
Vision positioning failure
In vision positioning
Self-inspection
RC and aircraft is paired, GPS is located
RC and aircraft is paired, GPS is not located
Horizontal calibration process
Vertical calibration process
RC and aircraft is not paired, GPS is not located
RC and aircraft is not paired, GPS is located
Serious error