ENGLISH
from the power supply before
any installation operation - risk
of electric shock.
During installation, make sure
the appliance does not damage
the power cable - risk of fire or
electric shock. Only activate the
appliance when the installation
has been completed.
This appliance is intended to
be used built-in.
Do not use it freestanding or
place into a cabinet.
After unpacking the appliance,
make sure that the appliance
door closes properly. In the event
of problems, contact the dealer
or your nearest After-sales
Service.
ELECTRICAL WARNINGS
It must be possible to
disconnect the appliance from
the power supply by unplugging
it if plug is accessible, or by
a multi-pole switch installed
upstream of the socket in
accordance with the wiring
rules and the appliance must
be earthed in conformity
with national electrical safety
standards.
Do not use extension leads,
multiple sockets or adapters.
The electrical components must
not be accessible to the user
after installation. Do not use the
appliance when you are wet or
barefoot.
Do not operate this appliance
if it has a damaged power
cable or plug, if it is not working
properly, or if it has been
damaged or dropped.
If the supply cord is
damaged, it must be replaced
with an identical one by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard - risk of
electric shock.
7