Installation; Electrical Connection - IKEA FRAMTID Handbuch

ENGLISH

Installation

Mounting the appliance
Follow the supplied separate mounting
instructions when installing the appliance.
Electrical connection
Prior to connecting
Check that the voltage on the rating plate
corresponds to the voltage in your home.
Do not remove the microwave inlet
protection plates located on the side of the
oven cavity wall. They prevent grease and
food particles from entering the microwave
inlet channels.
Ensure the oven cavity is empty before
mounting.
Ensure that the appliance is not damaged.
Check that the oven door closes firmly
against the door support and that the
internal door seal is not damaged. Empty
the oven and clean the interior with a soft,
damp cloth.
Do not operate this appliance if it has a
damaged mains cord or plug, if it is not
working properly, or if it has been damaged
or dropped. Do not immerse the mains cord
or plug in water. Keep the cord away from
hot surfaces. Electrical shock, fire or other
hazards may result.
After connecting
The oven can be operated only if the oven
door is firmly closed.
The earthing of this appliance is
compulsory. The manufacturer will accept no
responsibility for injury to persons, animals
or damage to objects arising from the non-
observance of this requirement.
The manufacturers are not liable for any
problems caused by the user's failure to
observe these instructions.
17