Daylight Saving Time (Dst); Time Setting - Technoline WS9252 Bedienungsanleitung

You may press "RCC" key to receive the time signal manually. The receive
mode will be off automatically after 6-16 minutes. Receive mode consumes
more battery power that may reduce battery lifetime.

DAYLIGHT SAVING TIME (DST)

The weather station has been programmed to automatically switch when
daylight saving time is in effect. Your weather station will display "DST" on
the LCD during the summer.

TIME SETTING

If the weather station does not receive the time signal successfully, you can
set the time manually. As soon as the transmitter is received again, the
clock will automatically synchronize with the received time.

In normal mode, press and hold "DISPLAY SET" key for 3 seconds
until the Hour format digit flashing.

Press "+" / "-" key to select 12/24 hour format.

Press "DISPLAY SET" key again to step the setting item to Hour with
the Hour digit flashing.

Press "+" / "-" key to adjust the value of the flashing digit.
Do the above operation in this sequence: 12/24 Hr > Hour > Minute >
Second > Time difference.
GB4