Operating And Status Indicators; Mounting - SICK HTB18 Betriebsanleitung

4

OPERATING AND STATUS INDICATORS

4 Operating and status indicators
5

Mounting

6
2 1 3
2
3
4
Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐
sories).
NOTE
Note the sensor's maximum permissible tightening torque of 0.56 Nm.
Note the preferred orientation of the sensor relative to the direction of object motion,
refer to figure 1.
Figure 1: Sensor orientation relative to object direction
Potentiometer adjustment (if
1
selected by model configuration) or
LED Indicators
LED indicator green: supply voltage
2
active (with IO Link, flashes when IO
Link Communication is active)
LED indicator yellow: status of
3
received light beam (with IO Link,
when teach mode is active)
Signal strength light bar (if selected
4
by model configuration)
8017850.1A15 / 2020-12-14 | SICK
Subject to change without notice