Standard brakes
Actioning the brakes: push the brake handle down as
GB
Releasing the brakes: pull the brake handle back into
Pull brakes
The models with removable leg supports are, for safety reasons, only
fitted with the pull brake so that if the leg supports swing back the brake
cannot be released.
Actioning the brakes: pull the brake lever backward
Releasing the brakes: push the brake lever forward.
Performance brakes
Actioning the brakes: push the brake lever as far as the
Releasing the brakes: pull the brake lever back. the
Active brakes
Actioning the brakes: pull the brake handle to the
Releasing the brakes: push the brake handle back
Stoplock brakes
Actioning the brakes: Lift the red handle positioned
Releasing the brakes: Swing the handle back into
30
far as the stop.
vertical position.
as far as the stop.
stop. The gripper swings against
the backwheel.
brake gripper swings away from
the wheel.
front, reaching either between
or beside your knees.
under the seat cover, reaching
either between or beside your knees.
on the rear wheel hub and
swing it to 180° so that it is
placed against the hub again.
closed position.