Ec Declaration Of Conformity; Important Safety Warnings - Makita DHW080 Betriebsanleitung

WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
IMPORTANT SAFETY
WARNINGS
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
WARNING – When using this product, basic pre-
cautions should always be followed, including the
following:
Work area safety
Keep operating area clear of all persons.
1.
2. Do not overreach or stand on unstable supports.
Keep good footing and balance at all times.
3. Always place the high pressure washer body
on a level and stable surface. Avoid areas
where the ejected water will run or pool.
4. Before cleaning, check the surroundings and
objects to be cleaned. High pressure jets can
scrape away paint or other surface treatments
including toxic chemicals. Take the preventive
measures if necessary.
5. Be careful not to trip over by the hose of the
high pressure washer. Always be aware of the
configuration of the hose during operation.
6. During use, a small amount of water will come
out from the bottom of the high pressure washer.
Avoid locating the high pressure washer in the
areas where you don't want to wet.
Personal safety
To protect against the jet and objects by the
1.
jet, operators should wear appropriate cloth-
ing such as safety boots, safety gloves, safety
helmets with visors, hearing protection, etc.
Do not use the high pressure washer within
2.
range of persons unless they wear protective
clothing.
3. To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
4. If connection is made to a potable water sys-
tem, the system shall be protected against
backflow.
5. Water that has flowed through backflow pre-
venter is considered to be non-potable.
Electrical safety
1. Never touch battery cartridges with wet hands.
Do not use the machine if the important parts
2.
of the machine are damaged, e.g. safety
devices, high pressure hoses, or the trigger
gun.
Power tool use and care
1. Read all the instructions before using the
product.
2. Know how to stop the high pressure washer
and bleed pressures quickly. Be thoroughly
familiar with the controls.
High pressure jets can be dangerous if mis-
3.
used. The jet must not be directed at people,
live electrical equipment, or the machine itself.
This machine is not intended for use by per-
4.
sons (including children) with reduced physi-
cal, sensory, or mental capabilities, or lack of
experience and knowledge.
5. Children should be supervised to ensure that
they do not play with the appliance.
Do not spray flammable and/or toxic liquids.
6.
This may cause an explosion, intoxication, or
damage to the machine.
Do not direct the jet against yourself or others
7.
in order to clean clothes or foot-wear.
8. High pressure hoses, fittings and couplings
are important for the safety of the machine.
Use only hoses, fittings and couplings recom-
mended by the manufacturer.
9. Follow the instructions when changing accessories.
10. Keep handles dry, clean, and free of oil or
grease.
11. Stay alert – watch what you are doing.
12. Do not operate the product when fatigued or
under the influence of alcohol or drugs.
13. Do not run the high pressure washer without
water for longer than one minute. It will dam-
age the motor, resulting in malfunction.
14. Always turn off the power and shut off the
water mains when leaving the high pressure
washer unattended.
15. Be wary of the kickback. The trigger gun
recoils when the high pressure jet is ejected
from the nozzle. Hold the trigger gun firmly to
prevent accidental injuries.
16. Check for damaged or worn parts before use.
Also make sure that the hose is properly con-
nected and there is no leakage during oper-
ation. Operating the machine with functional
defects may cause an accident.
17. This machine has been designed for use with
the cleaning agent supplied or recommended
by the manufacturer. The use of other cleaning
agents or chemicals may adversely affect the
safety of the machine.
13 ENGLISH