Axis Communications V59 Serie Installationsanleitung Seite 11

5. Attach the short end of the threaded rod to the camera and tighten.
6. Assemble the camera, ceiling tile and the mounting bracket and tighten the nut.
1
Camera
2
Ceiling tile
3
Threaded rod
4
Mounting bracket
5
Nut
6
Tripod screw
7. Route and connect all cables to the camera.
NO TICE TICE
NO NO TICE
Be careful not to stretch or bend the cables too much. This could cause damage to the
cables.
8. Connect the power supply to a mains power outlet (100–240 VAC).
9. Install the ceiling tile with the camera mounted on it.
Connect the Camera to a HDMI Display
The camera can be connected to a HDMI display and transmit audio and video to that display
without the need for a network connection.
If the display supports the maximum resolution of the camera, just connect the display without
adjusting any settings.
AXIS V59 Series
11
EN