Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
1. Press selection button 1 until
refrigerator compartment display 2 is
activated.
2. Keep pressing +/– buttons 7 until
the required temperature is indicated.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
1. Press selection button 1 until freezer
compartment display 3 is activated.
2. Keep pressing +/- buttons until
the required temperature is indicated.
Special functions
Fig. "
timer
You can use this function to set
a period of time of 1–99 minutes. A
signal reminds you, e.g. when food is to
be taken out of the compartment after
a certain time.
A value of 20 minutes has been preset at
the factory.
m
Caution
Drinks bottles may crack if they are
stored for longer than 20 minutes in
the freezer compartment.
Switching on the function
1. Press "timer" button 10.
2. Using the +/- buttons, set the required
time.
Switching off the function
Press the "timer" button 10 twice within
3 seconds.
"eco"
The "eco" function switches
the appliance to energy-saving mode.
The appliance automatically sets
the following temperatures:
Refrigerator compartment: +6 °C
■
Freezer compartment: –16 °C
■
Switching on the function
1. Press "setup" button 4 until
the required special function is
encircled.
2. Acknowledge the selection with
the setting button "+".
When the function is switched on,
a triangle is indicated.
Switching off the function
To switch off, reselect the special
function with the "setup" button 4 and
press the setting button "-". The triangle
behind the function disappears and is
therefore switched off.
"lock"
The "lock" function can be used
to safeguard the appliance
from unintentional use.
en
33