Duronic HM3 Bedienungsanleitung Seite 11

Make sure the plug pins align with
the socket when inserting as incorrect
alignment may damage the pins.
Always disconnect the appliance from the
socket if it is not in use, left unattended or
being assembled/disassembled.
Please stop the mixer after every 3 min-
utes of operation and allow it to cool down
for 15 mins before using again. This will
ensure the long lifespan of the product.
Please make sure the mixer is switched
off before attaching the beater/dough
hooks.
Precaution
Make sure the
household voltage
corresponds with the
voltage on
the rating label (220V –
240V).
Do not pull the power
cord. Always hold the
plug firmly and pull out
of the socket.
Switch off the socket and gently remove
the plug from the wall outlet.
Hooks should be installed in the
correct holes.
The beater and dough hook must not be
used at the same time.
Any accessories not supplied by Duronic
specifically for this model are not
recommended for use.
11
Please use 6a
socket single
alone. sharing the
socket with other
appliance may
lead to heating
or fire.
Do not use any
metal objects or
harsh materials
near the mixer as
it may scratch the
surface.