Preparing For Installation; Safety Percautions - Carrier 42QTD024DS-Serie Installationshandbuch

1. PREPARING FOR INSTALLATION

1.1 SAFETY PRECAUTIONS
I
nstalling, starting up, and servicing air-conditioning equipment can be hazardous due to system
ressures, electrical components, and equipment location (roofs, elevated structures, etc.).
O
nly trained, qualified installers and service mechanics should install, start-up, and serve this equipment.
W
hen working on the equipment, observe precautions in the literature and on tags, stickers, and labels
attached to the equipment.
F
ollow all safety codes. Wear safety glasses and work gloves. Keep quenching cloth and fire extinguisher
nearby when brazing. Use care in handing, rigging, and setting bulky equipment.
R
ead these instructions thoroughly and follow all warnings or cautions included in literature and attached to
the unit. Consult local building codes and National Electrical Code for special requirement.
WARNING
This symbol indicates the possibility of personnel injury or loss of life.
R
efrigerant gas is heavier than air and replaces oxygen. A massive leak could lead to oxygen
depletion, especially in basements, and an asphyxiation hazard could occur leading to serious
injury or death.
W
hen the air conditioner is installed in a small room, provide appropriate measures to ensure that
the concentration of refrigerant leakage occur in the room does not exceed the critical level.
I
f the refrigerant gas leaks during installation, ventilate the area immediately.
Refrigerant gas may produce a toxic gas if it comes in contact with fire such as from a fan heater, stove or cooking device.
Exposure to this gas could cause severe injury or death.
D
isconnect from power source before attempting any electrical work. Connect the connective cable
correctly.
Wrongly connecting may result in electric parts damaged.
U
se the specified cables for electrical connections and attach the wires firmly to the terminal block
connecting sections so that the external force is not exerted to the terminal.
B
e sure to provide grounding.
Do not ground units to gas pipes, water pipes, lightning rods or telephone wires. Incomplete grounding could cause a severe
shock hazard resulting in injury or death.
S
afely dispose of the packing materials.
Packing materials, such as nails and other matal or wooden parts, may cause stabs or other injuries. Tear apart and throw away
plastic pacaging bags so that children will not play with them. Children playing with plastic bags face the danger of suffocation.
D
o not install unit near concentrations of combustible gas or gas vapors.
B
e sure to use the supplied or exact specified installation parts.
Use of other parts may cause the unit to come to lose, water leakage, electrical shock, fire or equipment damage.
W
hen installing or relocating the system, do not allow air or any substances other than the
specified refrigerant (R410A) to enter the refrigeration cycle.
T
his appliance is not accessible to the general public and intended to be maintained by qualified
service personnel and located at a level not less than 2.5m from floor.
E
lectrical work should be carried out in accordance with the installation manual and the national,
state and local electrical wiring codes.
B
e sure to use a delicated power circuit. Never share the same power outlet with other appliance.
GB-3