REPLACING THE BULB
The lamp in this household appliance is only suitable for illumination of this appliance. The
lamp is not suitable for household room illumination.
The lamp is a consumer item and therefore not covered by warranty. Replace the
defective lamp with a lamp of the same type.
Firmly re-tighten the screws on the cover using a screwdriver;
otherwise, sparks may appear.
1
Remove the four screws from the cover
panel. Remove the cover panel and the
glass.
2
Remove the bulb and install a new one.
Please note: the light bulb can be very
hot! Use protection to remove the bulb.
Attention: Do not allow the sealing ring
to be detached from the cover panel.
43