Sentiotec VitaMy 164 Montage- Und Gebrauchsanweisungen Seite 64

Instructions for installation and use
After the roof elements have been inserted, they have to be screwed in with the
roof support slat.
Fig. 19: Attaching the roof element
Door installation
Fig. 20: Installing the door insulation strips
The insulation is placed on the glass element which does not have any holes
for the door fittings. Make sure that the stop of the insulation is on the inside.
Screws
14 units: 3.5 x 35
p. 20/44