Faults - WIKA CTH6200 Betriebsanleitung

7. Faults

7. Faults
Personnel: Skilled personnel
Protective equipment: Protective gloves and safety goggles
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the instrument
must be taken out of operation immediately.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given in chapter
9.2 "Return".
WARNING!
Physical injuries and damage to property and the environment caused
by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
▶
Wear the requisite protective equipment.
For contact details see chapter 1 "General information" or the back page of
the operating instructions.
Display Cause
Low battery voltage, functioning is
only guaranteed for a short period of
time
With mains operation: Incorrect
voltage
Battery is empty
With mains operation: Incorrect
voltage
WIKA operating instructions, model CTH6200
Measures
Insert new battery, see chapter
8.2 "Battery replacement"
Check/exchange power supply unit
Insert new battery, see chapter
8.2 "Battery replacement"
Check/exchange power supply unit
EN
31