Height Adjustment; Backrest Adjustment; Cleaning And Maintenance - Nuna arra next Bedienungsanleitung

Height Adjustment

for Head Support and Shoulder Harnesses
Check that shoulder harness straps are set at the proper height. Please choose
the proper height of shoulder harness.
Shoulder harness straps must be nearest to your child's shoulders (19), but
not above the shoulder line. (20)
If the Shoulder harness straps are not at proper height, the child might be
ejected from the enhanced child restraint if there is a crash.
Pull the head support adjustment lever (21), meanwhile pull up or down the
head support until it snaps into one of the 10 positions. The head support
positions are shown as (22).

Backrest Adjustment

There are 3 angles for the backrest.
Please press backrest adjustment button (23) to heighten or lower the backrest.
(24)
Securing Child
1
- Press the rotating button to rotate for easier side loading/unloading of the
child. (25)
2
- Use Infant Insert.
After the child is placed in the enhanced child restraint, check whether the
shoulder harness straps are set to the proper height.
3
- While pressing the webbing adjustment button, pull completely the two
shoulder harness straps of the enhanced child restraint. (26)
4
- Unlock the buckle by pressing the red button. (27)
5
- Place child into the enhanced child restraint and lock the buckle. (28)(29)
11 ARRA next instruction
We recommend using the
infant insert while the baby
is under 60cm and until they
outgrow the insert.
6
- Tighten the shoulder harness straps by pulling the adjustment webbing.
(30)
Make sure the space between the child and the shoulder harness straps
is about the thickness of one hand.
Canopy
1
- To assemble the canopy, snap the canopy to the rear of seat. (31)
2
- To open the canopy, pull the canopy toward, and to close the canopy,
push it back. (32)
3
- The canopy window can be opened for ventilation. (33)
Detach & Assemble Soft Goods
see images (34)-(45)
To re-assemble the soft goods, reverse the aforementioned steps.

Cleaning and Maintenance

Clean the frame, plastic parts, and fabric with a damp cloth, but do not use
abrasives or bleach. Do not use silicon lubricants as they will attract dirt and
grime.
To ensure long-lasting use, wipe this product off with a soft, absorbent cloth
after using it in rainy weather.
Refer to the care labels attached to the soft goods for washing and drying
instructions.
It is normal for fabric to color from sunlight and to show wear and tear after a
long period of use, even when used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts are torn, broken,
or missing, stop using this product.
NUNA International B.V. Nuna and all associated logos are trademarks.
ARRA next instruction 12