Declaration Of Conformity; Extent Of Delivery - Altrad ATIKA KGSZ 305 N Originalbetriebsanleitung


Keep the operating instructions in a safe place for
future use.

Pass the operating instructions on to all persons
who work with the machine.
You may not start to operate the
machine until you have read these
original instructions, observed all the
instructions given and installed the
machine as described!
This machine must not be operated /
!
used by
restricted physical, sensory or mental
abilities or a lack of experience and/or
know-how or by persons who are not
familiar with the instructions. Local
regulations may stipulate an age
restriction for the user.
The machine must not be operated by
!
children or young people under 18
years of age.
EC Declaration of Conformity
No. (S-No.): 15485
according to EC directive: 2006/42/EG
We,
Altrad Lescha Atika GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Zug-, Kapp- und Gehrungssäge (Pull, Crosscut and Mitre
Saw) Typ / Modell KGSZ 305 N
Serial number: 000001 - 020000
is conform with the above mentioned EC directive as well as
with the provisions of the guidelines below:
2014/30/EU and 2011/65/EU
Following harmonized standards have been applied:
EN 55014-1:2006/+A1:2009+A2:2011; EN 55014-2:2015;
EN 61000-3-2:2014; EN 61000-3-3:2013;
EN 62841-1:2015+AC:15; EN 62841-3-9:2015+AC:16+A11:17
EN 60825-1 :2007
Duly authorised person for the complilation of technical
documents:
Altrad Lescha Atika GmbH - Technical department -
Josef-Drexler-Str. 8, 89331 Burgau - Germany
i.A.
Burgau, 10.12.2019 i.A. G. Koppenstein,
12
children, persons
Engineering design management
Contents
Declaration of conformity
Extent of delivery
Symbols machine /operating instructions
Characteristics noise values
Normal intended use
Residual risks
Safety instructions
Description of device / Spare parts
Preparing for commissioning
Commissioning
with
Adjusting the saw
Working with the saw
Maintenance and cleaning
Transport
Storage
Guarantee
Possible faults
Technical data

Extent of delivery

 Pull, crosscut and mitre saw KGSZ 305 N (preassembled
unit)
 2 support arms
 1 vice assembly
 1 anti-tip device
 1 dust bag
 1 set carbon brushes
 Tool
 Operating instructions
 Safety instructions for crosscut and mitre saws
 Assembly and operating instruction sheet
 Warranty declaration

After unpacking, check the contents of the box
 That it is complete
 Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
12
12
13
13
13
14
14
14
14
15
16
17
18
19
19
19
20
20