GB
6. Toggle switch
If the fan heater accidentally topples over, the device is
automatically switched off.
7. Protection Against Overheating
If the permissible temperature is exceeded, the fan heater
switches off automatically. When this happens, pull out the
plug and remove the cause (e.g. when the air grid is blocked or
covered). When the device has cooled sufficiently, it can be
started up again.
8. Faults
In the event of faults, please contact your electrical retailer. If
required, you can also address your queries to the service
hotline of Glen Dimplex Deutschland GmbH.
Tel.:
+49 (0) 9221 709-564
Fax:
+49 (0) 9221 709-589
To process your order, please state the device type as well as
its production number (E-Nr.) and manufacturing date (FD).
This information is listed on the type plate.
9. Cleaning
To clean the device, it must be disconnected from the mains
and allowed to cool down. Clean the outside of the unit using a
soft, damp cloth. Do not use scouring powder or furniture polish
as this may damage the surface. Dust which gathers inside the
device can be removed from the outside using a vacuum
cleaner.
An air filter is attached to the rear of the device. It can be
removed for cleaning purposes.
10. Warranty
This product is supplied with a two-year warranty according to
our terms of guarantee.
11. Note on Disposal
Do not dispose of the unit with general household
waste. The device must be taken to a local waste
disposal plant..
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D-95326 Kulmbach
kundendienst.hauswaerme@dimplex.de
5
hc210-en_ba 03/11/A
www.dimplex.de