Installing With Self-Tapping Screws; Installing With The Hook And Loop Fastener - Pioneer AVIC-F220 Installationsanleitung

Installation

Installing with self-tapping screws

% Secure it firmly using the self-tapping
screws.
Self-tapping screw
Drill 2 mm to 2.5 mm dia-
metre holes.
Installing with the hook and
loop fastener
1 Thoroughly wipe off both surfaces be-
fore affixing the hook and loop fastener.
Base unit
Surface of the glove
box or similar location
2 Peel off the protective sheet and attach
the hook and loop fastener.
Protective sheet
3 Decide on the installation position.
4 Peel off the other protective sheet and
install the base unit on the surface of the
glove box or similar location.
Base unit
Surface of the glove box
or similar location
Protective sheet
Section
04
Base unit
13
Engb