Carrier XCT7 Installations- Und Bedienungsanleitung Seite 35

Function Operation
Click on the time text (such as 08:00 in picture 2) to pop out the window
Choose the time of startup. Then set the temperature, wind speed and mode. Slide down and set the area
applied to and days of the week in the interface as shown in Picture 3.
Click "Done" key after setting.
Apply Zone Settings:
a. All select: The default setting is all users. Setting can be changed through the Pop up window.
b. None select: The default setting is no user. Setting can be changed through the Pop up window.
c. Zone: Choose zones from the Pop window. Setting can be changed through the Pop up window.
Select those indoor units which you want to choose by clicking the frame before them. A hook will appear
after selection.
After setting the apply area, click blank area. Pull-down lists will close.
35