Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.2 Assembly, wall-mounted socket, type 8571/12-...
To prevent dirt from contaminating the contacts, a compatible sealing cap can
be used (see Chapter 12, "Accessories and Spare Parts").
Position for use: When the plug is disconnected, it must be hung with the pins pointing
downwards.
8
Installation
Danger from live parts!
Risk of serious injury.
All connections and wiring must be disconnected from the power supply.
Secure the connections against unauthorised re-connection.
Danger of explosion!
There is a risk of injury to persons and material damage.
Choose a suitable conductor, so that the maximum permissible
conductor temperature is not exceeded.
If using wire end ferrules, fit these in a gastight manner using the
appropriate tool.
Only use 2-core cables, without screen braiding in intrinsically safe circuits.
Observe the insulating capacity and spacing between intrinsically safe and
non-intrinsically safe circuits, in accordance with IEC/EN 60079-1 and IEC/
EN 60079-14, section 12.
Only use separately tested cable glands and sealing plugs, which
have an EC-Type examination certificate.
Conductor insulation must reach right to the terminal.
The conductor must not be damaged (e.g. notched) when stripping the in-
sulation.
Always connect the protective earth conductor.
150942 / 8571601300
2013-06-21·BA00·III·en·07
WARNING
WARNING
Wall-Mounted Socket, Plug
8571/11, 8571/12
Installation
9
Werbung
Kapitel
Inhaltsverzeichnis
