Seguridad - Carrier XCT7 Installations- Und Bedienungsanleitung

Seguridad

•Si el aire acondicionado es transferido a un nuevo usuario, este manual también será transferido al usuario, junto
con el aire acondicionado.
• Antes de la instalación, asegúrese de leer las Consideraciones de Seguridad en este manual para la instalación
apropiada.
•Las consideraciones de seguridad señaladas abajo se dividen en dos secciones, "
Los asuntos que pertenecen a accidentes graves como resultado de una instalación equivocada, que podrían
conducir a lesiones graves o muerte, se enumeran bajo
" Atención" también podrían causar graves accidentes. En general, ambas secciones contienen consideraciones
de seguridad importantes que se deberían seguir estrictamente.
• Después de la instalación, efectúe una prueba de funcionamiento para asegurar que todo está en condiciones
de trabajo. Luego, operey mantenga el aire acondicionado de acuerdo con el manual del usuario. El manual del
usuario debería ser entregado al usuario para custodia adecuada.
• Please ask the special maintenance station for installation and repair. Water leakage, electric shocks or
fire accidents might be caused from improper installation if you conduct the installation on your own.
• The installation should be conducted properly according to this manual. Water leakage, electric shocks
or fire accidents might be caused from improper installation.
• Please make sure to install the air conditioner on a surface that can bear the weight of the air
conditioner. The air conditioner can't be installed on a grid such as the non-special metal burglar-proof
net. Insufficient support strength might cause the machine to fall, which may lead to personal injuries.
• The installation should be ensured against typhoons and earthquakes, etc. Installations which do not
conform to the requirements will lead to accidents due to the overturn of the machine.
• Specific cables should be used for reliable connections. Please fix the terminal connections reliably
to avoid any pull on the cables. Improper connections and installs might lead to accidents caused by
heating or may result in a fire.
• Correct shape of wirings should be used. Embossed shapes are not allowed. The wiring should be
connected reliably to avoid the cover and the plate of the electrical cabinet from ripping it. Improper
installation might cause such heating or fire accidents.
• While removing or reinstalling the air conditioner, use the specific refrigerant (R410A), and don't let any
ambient air go into the refrigeration cycle system. Air in the refrigeration system might lead to cracks or
personal injuries caused by the abnormal high pressure of the refrigeration cycle system.
• During installation, please use the spare parts provided or specified. Failure to do so might result in
water leakage, electric shocks, fire accidents or refrigerant leakage.
• Don't drain the water from the drainpipe to waterspout as harmful gases such as sulphureted gases
might enter the room.
• During installation, if the refrigerant leaks, ventilation measures should be taken as the leaked
refrigerant gas might generate harmful gases on interacting with a heat source.
• After installation, check for any refrigerant leakages. If the refrigerant gas leaks into the room, it may
interact with heaters, stoves, etc. and generate harmful gases.
• Don't install the air conditioner where flammable gases leakages might occur. Leakages around the
machine, might lead to fire incidents.
• The drainpipe should be properly mounted as per the manual instructions to ensure smooth drainage.
In addition, heat preservation should be followed to avoid condensation. Improper drainpipe mounting
might cause water leakage and wet home articles.
• The refrigerant gas pipe and liquid pipe should be heat insulated to preserve heat. Improper heat
insulation will cause condensation droplets to fall and wet home articles.
Advertencia". Sin embargo, aquellos enumerados bajo
Advertencia
2
Advertencia" y " Atención".