Connection/Cabeling - Carson FY10 Betriebsanleitung

h. Connection/Cabling
Connect the ESC, motor, receiver,
battery and servo according to the following diagram.
Positive (+) and negative (-) wires of the ESC are connected with the battery pack.
GB
A, B and C are connected with the motor wires. The control cable of the ESC
(wires in black, red and white colour is connected with the throttle channel of the receiver (usually CH2).
The A, B, C wires of the ESC can be connected with the motor wires freely (without any order).
If the motor runs in the opposite direction, please swap any two wire connections.
Input TH channel
Receiver
Input ST-wire
Steering servo
26 CARSON FY10 Brushless 50 040 4040
Switch
Red power wire
(battery positive)
Battery
Black power
wire (battery
negative)
Brushless Motor
Black wire
Yellow wire
Red wire