Installation - Tractel tirfor TU 6PM Installations- Und Wartungsanleitung

GB The end stirrups are specially designed for manual hoists. (See the temporary suspended platform
manual for how to fit the stirrups). Fix the hoist on each of the stirrups. Fit the blocstop™
safety device using its two bolts (H M 12 for BS 15.301 and 20301, H M 22 for BS 35.30).
Blocstop
tirfor
Fitting to other models of temporary sus-
pended platform:
Fit the blocstop™ on its bracket using its two
bolts (see previous paragraph). It is important to
comply with
suspension rope and the secondary rope to
ensure that the blocstop™ operates correctly.
This distance ensures that the device operates
correctly when the platform tilts and when the
secondary rope takes over if the suspension
rope breaks. The two wire ropes must
remain parallel.
Blocstop™ model BSA - automatic operation
a
®
the distance between
Suspension
rope
Values
Secondary
rope through axes
Detection
BSA 15301
roller
BSA 20301
BLOCSTOP
BSA 3530
hoist
WARNING
special anchoring device should be inspected
by a competent engineer
the
For any layout other than those described in
this manual, please do not hesitate to
contact TRACTEL S.A.S. For Belgium and
Luxembourg, please contact TRACTEL
BENELUX, or a competent specialist before
putting it into operation.
WARNING
calculation of the forces applied must be
inspected by
particular as regards the necessary strength of
the fixed points used.
3.

INSTALLATION:

a
mm
N. B. : Wear work gloves to protect your hands
100 when handling the wire ropes.
• Unwind the wire rope, avoiding twisting
100
and forming loops
• Attach the end hooks on the wire ropes
200
to the suspension point at the top
6
Blocstop
®
tirfor
: All layouts which require a
: Any layout which requires a
a competent engineer, in