Blanco drink.soda EVOL-S Pro Bedienungsanleitung Seite 49

Cleaning & filter-changing
Insert the EasyCare adapter
(with the EasyCare tab insert-
ed) into the filter holder.
Confirm that the EasyCare adapter
is inserted by pressing "OK". The
system then empties all of the
tanks, which results in a slight
splashing from the soda outlet.
This is perfectly normal.
The insert (EasyCare tab) may
only be used once.
Take the EasyCare tab out of
the adapter and dispose of it in
the household waste. Keep the
adapter.
To start the cleaning process,
press "Clean".
Do not drink any water
that is rinsed out during the entire
cleaning process !
As soon as "Filter INSTALL" lights
up on the display, you can insert a
new filter.
2 x
3 sec
Confirm "OK" for 3 seconds
to start the cleaning process.
Unscrew the EasyCare
adapter and its module
from the holder.
Screw in the filter with
roughly two twists.
When inserting the
new filter, make sure
that it is put in straight,
not slanted! You can
tilt the filter forward in
the appliance in order
to screw it in and out.
49