Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Transit on public roads
WARNING
It is prohibited to carry people and/or
things on the work vehicle.
Before using the machinery on the
road, remove the seedlings from their
respective holders and thoroughly
clean working parts and tyres to re-
move all traces of soil.
When transporting the work vehicle/trac-
tor assembly, the regulations of the high-
way code must always be complied with.
Remove the safety lock pin (A), slide out
pin (B), and lift the resting foot (C) off the
ground.
Slide the pin (B) and the lock pin (A) into place to block
the foot raised above ground level.
Obligatorily, the three-point hitch must be secured with
the relative bars (D) to prevent the work vehicle swing-
ing against the tractor and the speed of travel must be
adjusted to prevent loss of control of the tractor.
Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Clean the machine thoroughly, taking care to remove
any chemical or fertiliser residues (see "Cleaning the
work vehicle").
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Check that the screws are correctly tightened.
4) Grease to all the unpainted parts.
English language
INFORMATION FOR USE
UN41 0647MN
5) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
Lower the resting foot to the ground to guarantee work
vehicle stability.
34
D
6
A
B
C
Use and maintenance
Werbung
Inhaltsverzeichnis
