Saving, Displaying And Deleting Measured Values - Beurer BM 96 Cardio Gebrauchsanweisung

Saving, displaying and deleting measured values

The results of every successful measurement are stored together with the date and time. If there
are more than 60 measurements, the oldest measurement is lost.
• Press the START/STOP button
button M1 (for user
• Confirm your selection by pressing the START/STOP button
tomatically switches itself off.
• Press the START/STOP button
ory is displayed.
• Press the function button .
values in this user memory is displayed.
• Press the function button .
urements for the last 7 days is displayed (morning: 5 a.m. – 9 a.m.).
• Press the function button .
urements for the last 7 days is displayed (evening: 6 p.m. – 8 p.m.).
• When the function button is pressed again, the last individual measured values in each case are
displayed with the date and time (for example
• By pressing the function button again, you can view your individual measured values.
• To switch the device off, hold the START/STOP button
• To delete the memory of the selected user, press the function button for 5 seconds.
• appears on the display. All the values in the selected user memory have now been deleted.
. Select the relevant user memory by pressing the memory
) or M2 (for user ).
1 2
. The last stored measured value in the selected user mem-
lights up on the display. The average value of all saved measured
lights up on the display. The average value of the morning meas-
lights up on the display. The average value of the evening meas-
54
3 seconds. The device will au-
).
for 3 seconds.