Saving, Displaying And Deleting Measured Values - Beurer BM 40 Gebrauchsanweisung

Blood pressure Systole
value category (in mmHg)
Setting 3:
severe ≥ 180
hypertension
Setting 2:
moderate 160 – 179 100 – 109
hypertension
Setting 1:
mild 140 – 159 90 – 99
hypertension
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)
7. Saving, displaying and deleting measured
values
The results of every successful measurement are stored
together with the date and time. If there are more than 60
measurements, the oldest measurements are lost.
• Select the desired user memory (
the SET button and the function buttons -/+. Confirm
your selection with the START/STOP button
Diastole
Action
(in mmHg)
seek medical at-
≥ 110
tention
seek medical at-
tention
regular monitoring
by doctor
regular monitoring
by doctor
self-monitoring
< 80 self-monitoring
) by pressing
.
• Press the memory button M. The average value of all
saved measured values in this user memory is dis-
played first AL.
• If you press the memory button M again, the average
value of the morning measurements for the last 7 days
will be displayed (morning: 5.00 a.m. – 8.59 a.m., dis-
play A ).
• If you press the memory button M again, the average
value of the evening measurements for the last 7 days
will be displayed (evening: 6.00 p.m. – 7.59 p.m., dis-
play P ).
If there is no measurement in the memory, the de-
vice displays - - - .
• If you press the function buttons -/+, the most recent
individual measured values are displayed in turn with
the date and time. By pressing the function button
+ the most recent measurements are displayed; by
pressing the function button -, the oldest are dis-
played.
25