This quick reference guide is a fixed part of the
assembly instructions. Keep both this and the
assembly instructions in a safe place. When
passing this product on to third parties, please
be sure to include all documentation. Read the
assembly instructions before use, and pay parti-
cular attention to the safety instructions included
in the operating instructions.
You can download the assembly instructions at
the following internet link:
https://www.lidl-service.com
Scope of delivery (fig. A)
1 x stacking chair, unassembled (1-4)
1 x assembly materials (5-9)
1 x Allen key (10)
1 x quick start guide
Technical data
Dimensions:
approx. 60 x 60 x 86cm (w x d x h)
Maximum load: 110kg
110
Date of manufacture (month/year):
12/2020
Intended use
The product is designed for use in the home, e.g.
balcony, terrace, or garden. The product is not
intended for commercial use.
Safety information
Danger to life!
• Never leave children unsupervised with the
packaging material. Risk of suffocation.
Risk of injury!
• Before using the product check for correct
stability!
• Stand the product on an even surface.
• The product may only be used under adult
supervision and not as a toy.
• Check the product for damage or wear before
each use. Check regularly that all screw connec-
tions are tight! The product may be used only
when in good working order and condition!
• Do not use the product near a naked flame.
• Back and arm rests may not be used to sit on.
• Never stand on the product.
Avoiding material damage!
• Protect the product in extreme weather condi-
tions, e.g. in strong winds. Store the product in
a protected area.
8
GB/IE
Assembly
1. Place the product on an even and stable
surface.
2. Assemble the product as shown in figs. B-D.
3. Stand the product flat on the ground (fig. E).
Storage
• When not in use, always store the product
clean and dry at room temperature.
• Remember that wood can be affected by
changes in temperature, air humidity and
other factors.
• The wood in the product is a natural material
and there may therefore be slight variations in
colour and structure.
Cleaning and care
• Clean the product with a soft brush and a mild
solution of soap and water.
• Allow the product to dry completely after
cleaning.
• Treat the product with a wood treatment oil
from your specialist retailer. Treatment should
be performed several times during the season.
Before treatment the wood must be completely
dry!
• Follow the instructions of the manufacturer of
the wood treatment oil you have selected.
IMPORTANT! Never clean the product with
harsh cleaning agents.