Silvercrest SHLF 2000 D2 Bedienungs- Und Sicherheitshinweise Seite 11

Make sure that the nominal
voltage on the rating plate
complies with the supply
voltage.
The product has increased
energy consumption. Do not
connect any other devices (e.g.
heaters, air conditioners, etc.) to
the same circuit.
The use of extension cords is not
recommended. If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A.
Shield the product, power
cord and plug from dust, direct
sunlight and dripping and
splashing water.
Protect the product from heat.
Do not place the product in
direct proximity to open flames
or heat sources such as heaters,
ovens or stoves.
Protect the power cord from
damage. Do not allow it to hang
over sharp corners; do not crush
or bend it. Keep the power cord
away from any hot surfaces and
open flames. Make sure that no
one may accidentally pull on it
or trip over it.
Regularly check power plug and
power cord for damages.
Do not operate the product if the
power cord or power plug are
damaged, if the product does
not work or is damaged in any
way.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
GB 11