Pre-delivery service
1 Charge the battery for 4 hours at max. 3 amp.
2 Fit steering wheel, seat and any optional
equipment. See instructions under the heading
Assembly.
3 Check and adjust tyre pressure. (60 kPa, 0.6 bar,
9 psi). See instructions under the heading
Technical data.
4 Check that the right amount of oil is in the engine.
See instructions under the heading Technical
data.
5 Connect battery. See instructions under the
heading Assembly.
6 Fill with fuel and start engine.
7 Check that machine does not move in neutral.
8 Check:
Forward drive. Also see under the Drive system
section.
Reverse drive. Also see under the Drive system
section.
Operation of blades.
Seat safety switch. See the "Checking the safety
system" section.
Safety switch for parking brake. See the
"Checking the safety system" section.
After the first 8 hours
1 Change engine oil See the "Engine oil change"
section.
114 –
English
Service journal