Before Initial Use; Replacing The Battery - Auriol HG06544A Bedienungs- Und Sicherheitshinweise

Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity
marks (+) and (–) on the battery / rechargeable battery and the product .
Use a dry lint-free cloth or cotton swab to clean the contacts on the battery /
rechargeable battery and in the battery compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the product
immediately .
˜ Before initial use
Remove the battery from the box and plastic wrapper . Insert the battery into
the battery compartment, placing first the – contact and then pushing down at
the + contact .

Replacing the battery

Turn the wall clock over . Place it on a soft underlay to avoid scratching the
surface .
Remove the battery and then insert a new battery with the correct polarity .
Make sure to first insert the battery into the battery compartment from the
negative terminal . Then, press down the positive terminal of the battery .
The wall clock is now ready for use .
Radio Signal (DCF for HG06544A,B, MSF for HG06544A,B-BS):
HG06544A,B:
The DCF signal (time signal transmitter) consists of time pulses emitted by one of
the most accurate clocks in the world . This clock is located close to Frankfurt /
Main, Germany and it can usually achieve an accuracy within a hundredth of a
second relative to the time standard .
Your radio-controlled wall clock receives these signals under ideal conditions up to
a distance of approx . 1,500 km around Frankfurt / Main . Reception of the radio
signal generally takes approx . 3 to 12 minutes .
34 GB/MT