Rimage PrismPlus Benutzerhandbuch Seite 15

Rimage PrismPlus! User Guide
5. Configure the Prism driver options.
a. Right-click on the Printer icon.
b. Select Properties. The Rimage Perfect Image Printer PF Properties window opens.
c. On the Device Settings tab:
i. Select the type of

Note: The Double Print feature that is available with monocolor ribbons allows you to print the same label
twice on the disc. If you would like the printed areas on your discs to have more density, enable Double
Print. Using Double Print consumes more ribbon.
ii. Change the Master Print Strobe to achieve the best print results.
•
350 ms for monocolor
•
425 ms for color
d. On the Advanced tab:
i. If the Prism is being used as a standalone printer or is attached to an AutoPrinter, select
so program finishes printing faster.
ii. Make sure the Enable advanced printing features box is clear.
USB port selection:
e. Verify the
i. Select the Ports tab.

Note: The USB port selected is the port that the driver attempts to use. This verifies whether this port is the
correct port for the printer.
ii. On the Prism printer, press the
iii. Place a disc on the printer tray.
iv. Press the operator button to close the tray.
v. Select the General tab.
vi. Select Print Test Page. If the USB port selected is correct, a test image prints on the disc.
vii. If the USB port is not correct, repeat steps i–vi, with a different USB port selected, until the test is successful.
-
Important!
in the print queue.
viii. After a test image successfully prints, select
The driver installation is complete.
12
All manuals and user guides at all-guides.com
installed ribbon. A monocolor ribbon is shipped with new Prism printers.
operator button to open the tray.
If you try multiple USB ports before the test successfully prints, be sure to delete the extra jobs
OK.
Spool print documents
110635_J