Inhaltsverzeichnis
Werbung
en
Use
!
WARNING
Damage to the instrument
If several tests are carried out in a short period of time, condensation can collect
inside the funnel which can then get into the instrument.
►
Replace the funnel in good time.
4.3.1
Reading measurement result
After a few seconds (depending on the concentration measured and the
temperature of the device), the test results are shown on the display and saved
to the instrument. Two different results are possible:
C
27.12.2016
C) No alcohol has been found to be present. The test is passed. In addition to
that, the green LED lights up. After a few seconds, the instrument is ready to use
again.
D) Alcohol has been found to be present. The test is not passed. In addition to
that, the red LED lights up. Press the
measurement.
During the sensor recovery time, the display shows a rotating progress
symbol.
Repeat the process (See Page 23 Chapter "Carrying out automatic breath
sampling")
Confirmation of the test results Alcohol and No Alcohol can be configured in
the menu as follows:
Confirm the test results by pressing the
Or
The test results are confirmed automatically after 2 seconds.
24
10:25
#00075
D
27.12.2016
button to continue with the next
button.
10:25
#00075
00633785
Werbung
Inhaltsverzeichnis
