Operation; Before Use; Adjusting The Telescopic Handle; Using The Appliance - Parkside PUV 1100 A1 Originalbetriebsanleitung

Operation

Before use

NOTE
♦ Push the loop of the extension cable into the
provided strain relief 4 in the handle 2 and
fix it to the bar provided.

Adjusting the telescopic handle

♦ Turn the quick release
release it.
Extend the telescopic handle 5 to the desired
♦
length.
♦ Turn the quick release
again.
│ GB │ MT
■ 30
6 anticlockwise to
6 clockwise to lock it

Using the appliance

♦ Connect the appliance to a power socket
(230 V alternating current) using an extension
cable.
♦ Switch the appliance on by pressing the
ON/OFF switch 1.
The appliance is ready for operation after
approx. 30 seconds.
WARNING!
► Heating work is forbidden when protective
cover 0 is closed, otherwise the appliance
may be damaged due to over-concentrated
heat.
Open the protective cover 0 by pressing the
♦
lever 7 from above with your foot. Tip the
appliance backwards slightly to make it easier
to open the protective cover 0.
The protective cover 0 opens.
To kill weeds, move the heating element 9
♦
over the plant to be treated for around
5–10 seconds (depending on the type of
plant).
♦ Tall plants will need to be trimmed before you
can position the heating element 9 over them.
PUV 1100 A1