Disposal; Description Of Symbols - Viking ME 339 Gebrauchsanleitung

Keep the electric cable away from the
blade when mowing.
Only use extension cables that are
insulated against moisture for outdoor use
which are suitable for use with the
machine ( 11.1).
Although the drive motor is
splashproof, do not use the lawn
mower when it is raining or in wet
environments.
Do not leave the machine unprotected in
the rain.
Detach electric cables at the plug and
socket and not by pulling on the electric
cable.
Only connect the machine to a power
supply that is protected by means of a
residual current-operated protective
device with a release current of a
maximum of 30 mA. Your electrician can
provide further information.
It must be noted that current fluctuations
can damage the lawn mower when the
machine is connected to a power
generator.
Always ensure that the power cables used
are adequately protected by a fuse.
For reasons of electrical safety, the electric
cable must always be correctly installed on
the handlebar ( 7.2).

4.7 Disposal

Ensure that old machines are properly
disposed of. Render the machine
unusable prior to disposal. In order to
prevent accidents, ensure that you remove
the power supply cable or the electric
cable from the on/off switch to the motor.
0478 121 9917 C - EN
All manuals and user guides at all-guides.com
Risk of injury due to the mowing blade!
Always store an old lawn mower in a safe
place prior to scrapping. Ensure that the
machine and the mowing blade are kept
out of the reach of children.

5. Description of symbols

Caution!
Read the instruction man-
ual before initial use.
Risk of injury!
Keep other persons out of
the danger area.
Risk of injury!
Beware of the sharp mowing
blade. The mowing blade
runs on for several seconds
after switching off
(motor/blade brake). Before
performing any work on the
cutting tool, before carrying
out maintenance and clean-
ing work, before checking
whether the electric cable is
entwined or damaged, or
before leaving the machine
unattended, switch off the
motor and disconnect the
plug.
Danger of electric shock!
Keep the electric cable
away from the cutting tool.
35