Cleaning Under The Machine; Washing Method - Toro 22275 Bedienungsanleitung

Cleaning under the Machine

Service Interval: After each use
To ensure the best performance, keep the underside
of the machine clean and clean under the machine
soon after you have completed mowing. Be especially
careful to keep the kickers free of debris
Figure 20
1. Kickers

Washing Method

WARNING
The machine may dislodge material from
under the machine.
• Wear eye protection.
• Stay in the operating position (behind the
handle) while the machine is running.
• Do not allow bystanders in the area.
1. Lower the machine to its lowest cutting-height
setting.
2. Move the machine to a paved level surface.
3. Turn on the machine and engage the blade.
4. Hold a garden hose at handle level and spray a
stream of water in front of the right, rear wheel
(Figure 21).
Note:
The water will splash into the path of the
blade, cleaning out the clippings.
(Figure 20).
1. Right, rear wheel
5. When no more clippings come out, stop the
water and move the machine to a dry area.
6. Run the motor for a few minutes to dry the
underside of the machine.
Scraping Method
If washing does not remove all debris from under the
machine, scrape it clean.
1. Shut off the machine and wait for all moving
g240549 parts to stop.
2. Remove the electric-start button and the battery
from the machine.
3. Tip the machine onto its side.
4. Remove the dirt and grass clippings with a
scraper. Avoid any burrs or sharp edges.
5. Return the machine to the operating position.
22
Figure 21
g002600